horsch Tiger 3 MT, Operating Instructions Manual

Page: 57 / 94

Tiger 4 MT tractor link arm
hitching
1. Fully raise the machine via packer and trac-
tor link arm.
2. Lift the DiscSystem separately via the tractor
control unit.
3. Fold and secure the support.
4. Close the lock valve for the levelling discs
and the TopRing Packer (option).
5. Fold the machine completely inward.
CAUTION
Risk of machine damage from collision between
lateral wings and tank.
¾
For machines with DuoDrill insert aluminium
clips with 100 mm thickness on the packer
cylinders.
6. Set the three-way valve to Road .
7. Insert the aluminium clips on the packer
cylinders and lower the machine to the alu-
minium clips.
8. Insert enough clips to achieve adequate
ground clearance.
9. Note at the same time that the permissible
transport height is not exceeded.
10.Keep operating the control unit to retract the
side packers.
11.Watch out for collisions of the side packers
and insert aluminium clips on the cylinders
of the side packers, if necessary.
12.Turn the lighting carriers to the road travel
position.
13.Lock and secure the control units.
Tiger 4 MT swinging drawbar
hitching
1. Releasing the parking brake (option).
2. Fully raise the machine via packer and
drawbar.
3. Lift the DiscSystem separately via the tractor
control unit.
4. Fold and secure the support.
5. Close the lock valve for the levelling discs
and the TopRing Packer (option).
6. Fold the machine completely inward.
CAUTION
Risk of machine damage from collision between
lateral wings and tank.
¾
For machines with DuoDrill insert aluminium
clips with 100 mm thickness on the packer
cylinders.
7. Set the 3-way valve to Road .
8. Insert the aluminium clips on the packer
cylinders and lower the machine to the alu-
minium clips.
9. Insert enough clips to achieve adequate
ground clearance.
10.Note at the same time that the permissible
transport height is not exceeded.
11.Keep operating the control unit to retract the
side packers.
12.Watch out for collisions of the side packers;
insert aluminium clips on the cylinders of the
side packers, if necessary.
13.Turn the lighting carriers to the road travel
position.
14.Close the lock valve on the cylinder of the
drawbar.
15.Lock and secure the control units.
53