horsch Pronto 40 DC, Owner'S Manual

Page: 49 / 76

Pronto 40 DC Owner’s Manual – Ver. 1.0 04/2017 49
www.horsch.com
Lift and fold up the drill. See ‘ Folding’ instructions below in this section. Insert the wing lock pins.
Wing lock pin inserted to lock position
Check all hydraulic and electrical plug connections for cleanliness and tight fit. Dirty connectors will
contaminate the flowing media in the hydraulic system and cause electrical interruption or loss of power
in signal wires. The connectors therefore become worn and this results in malfunctions and failures in
the connected assembly groups.
SAFETY WARNING
Tractor mounted control units must be secured or locked when not in use or in transport position.
Persons must not remain in the operating range of foldable machine components.
Perform folding operations only after the machine has been raised.
Insert wing lock pin
here during fold/unfold
and field operation.