horsch Pronto 40 DC, Owner'S Manual

Page: 27 / 76

Pronto 40 DC Owner’s Manual – Ver. 1.0 04/2017 27
www.horsch.com
Safety Symbols on the Machine (cont’d):
It is only permitted to remain in the danger zone if the safety support is in place!
When hitching up the drill and when operating the hydraulic system, no persons
should be between the machines!
No passengers are allowed to ride on the machine!
Do not climb on rotatable parts. Use mounting steps provided for this purpose!
Lifting hook; attach lifting tackle (chains, ropes, etc.) here when performing loading
work!
Operational Safety
The machine must only be put into operation after receiving instructions by employees of the authorized
dealer or a
HORSCH employee. The Machine Registration Form is required to be completed and returned
to HORSCH .
Do not make field adjustments while machine is in motion.
Do not enter seed tank of cart unless another person is present and hydraulic hoses are disconnected
from tractor.
Operate machine from the tractor seat only.
Keep hands and fingers away from hinge area when positioning fill auger. Lock auger in storage position
before operating in field.
Clear area around machine before raising or lowering machine or wings.
Stop tractor on level ground when raising or lowering machine or wings.
Do not operate with wings raised. To improve stability, travel through the field with the wings unfolded.
Fold wings to transport position just before leaving the field and entering a roadway.
Do not operate close to the edge of a ditch, creek, gully or steep embankment.
Avoid holes, ditches and obstructions which may cause tractor, cart or seeding tool to roll over, especially
on hillsides.