Maintenance location
Work instructions
Interval
Wheels / brakes
Undercarriage / wheels
Check for damage (cracks, etc.).
daily
Check fastening / retighten wheel nuts - see above.
see above
Check air pressure
• Undercarriage: 445/65-22.5:
8.0 bar
• Support wheels: 400/60-15.5:
4.9 bar
daily
Bearings of carrying axle journals
Check clearance and adjust if necessary (must only be
carried out by an expert workshop).
120 h /
6 months
Safety installations
Lighting and warning boards
Check condition and function.
daily
Warning and safety stickers
Check that they are in place and legible.
40 h
At the end of the season
Complete machine
Perform care and cleaning work; do not spray plastic parts with oil or similar.
Spray the piston rods of the hydraulic cylinder with a suitable corrosion
protection agent.
Check all screw and plug-and-socket-connections for firm seating (see
torque table).
Check frame and connecting parts for condition and firm seating.
Check electrical lines for damage and replace, if necessary.
Store terminal in a dry place.
Brake system
Release parking brake, drain air reservoir, close brake lines, check
setting.
Levelling discs
Spray mounting with penetrating oil.
66
Summary of Contents for Focus 7 MT
