Horotec VIBRATO MSA 19.709, Operating Manual, Page: 23 / 25

23
Abbreviations and meanings of the cleaning movements :
Abbreviation Movement Description
ST Stop No turning
ST Slow turning t/2 to left side, then right
FT Fast turning t/2 left side, then right
SA Slow alternating n turns left, then n turns right
FA Fast alternating n turns left, then n turns right
SO Slow oscillating n turns left, then 0,7n turns
right
FO Fast oscillating n turns left, then 0,7 n turns
right
SX Slow extra (osc+ up/down) n turns left, then 0,7 n turns
right + u p and down
FX Fast extra (osc+ up/down n turns left, then 0,7 n turns
right + p and down
VB Vibrasonic ( optional ) n turns left, then 0,7 n turns
right (fast acceleration –
vibrasonic movement)
Now, one can globally set the rotation speed for every single movement. For oscillating or changing
movements, the optional software also offers the setting for the number of rotations. Otherwise, the
factory values will be displayed.
"Heating" : The temperatures for "WA" warm air and “HA” hot air can be set. Please note that the heating
due to the air tube made of stainless steel has certain inertia. By pressing the [START/stop] button, one can
test the heating and directly read the temperature of the air at the sensor.
Please make a test without any pieces, to approach the ideal heating temperature and time to avoid
overheating of the pieces to dry.
"Beeper": activate or turn off the confirmation beep emitted by pressing the ENC.