15
To create or change a program, select the corresponding storage place.
After confirmation, the overview of the selected storage space is displayed.
One can now move the cursor by turning the ENC and change the value by pressing on the appropriate
location as described earlier in this guide.
In the field "Name:" it is advisable to enter a descriptive name to the program so that other users can
easily identify the program.
The input of letters is made by turning the ENC and confirmed by pressing on it.
"Steps" :
shows the step number in the program. If no steps have been programmed, the number "0"
appears.
"Duration" :
it is determined on the basis of different cleaning times in each bath, spinning and drying,
times as well as the duration of the movements. As soon as a cleaning program has been completely
executed, the machine calculates the duration of the movements and the total duration. It displays them
immediately on numeric value and on the progress bar.
"Counter" :
it displays the number of uses of a program in memory.
"Reset counter" :
to reset the counter, select [Counter reset] and confirm by pressing on the ENC.
"Steps" :
To create a step sequence -‐ a sequence of various cleaning programs -‐ select [Steps] and confirm
by pressing the ENC.
The name of the sequence of steps is selected here because during the cleaning program and the
programming, the different steps are represented on the right of the display as a sequence from top to
bottom.
Summary of Contents for VIBRATO MSA 19.709
Page 1: ......