© 2001 Directed Electronics, Inc. Vista, CA
5
H1/1 ORANGE (-) GROUND-WHEN-ARMED OUTPUT
This wire supplies a (-) 500 mA ground as long as the system is armed. This output ceases as soon as the system
is disarmed. This output can be used to interrupt the starter circuit using an optional
8618
starter kill relay.
H1/2 WHITE (-) LIGHT FLASH OUTPUT
The unit supplies a 200 mA output that can be used to flash the parking lights of the vehicle. If the vehicle uses
a relay to drive the parking lights, this wire may be connected directly to the control wire for the factory relay.
In most cases, however, a relay will be required to drive the parking lights, as shown below.
H1/3 BLUE (-) INSTANT TRIGGER INPUT
This input can be used for hood and trunk pins or optional sensors.
H1/4 BLUE/WHITE 2V (-) LED OUTPUT
Connect this wire to the blue wire of the supplied LED. Connect the RED wire of the LED to a fused source of (+)
12V.
H1/5 BLACK (-) CHASSIS GROUND CONNECTION
Remove any paint and connect this wire to bare metal, preferably with a factory bolt rather than your own screw.
(Screws tend to either strip or loosen with time.) We recommend grounding all your components, including the
siren, to the same point in the vehicle.
primary harness (H1) wire connection guide