© 1995,1996 Directed Electronics, Inc. Vista, CA
5
97N719T.PM5
4/97
Many of the system features are programmable. The Operation Settings Learn Routine
™
is used to access and
program the system features. You must have a programmed transmitter to program features.
To enter Learn Routine™:
1. Arm the system.
2. Disarm the system.
3. Press and hold both buttons on the transmitter until the unit generates a long chirp. The long
chirp is followed by a short chirp indicating step one in the Operation Settings Learn
Routine™.
4. Release the transmitter buttons.
Repeat steps 3 and 4 to advance to the next step. Each time, the short siren chirps will indicate
what step you have accessed.
5. Program the selected feature. Pressing button one on the transmitter will select the one chirp
setting and the siren will chirp once. Pressing button two on the transmitter will select the two
chirp setting and the siren will chirp twice. The default settings are the one chirp settings except
where indicated by bold text.
After programming a feature, another feature can be selected by repeating steps 3 and 4. The Learn Routine™
will be exited if you wait longer than 5 seconds between steps. The system will exit Learn Routine™ immediately
if you repeat steps 3 and 4 more times than there are features. When Learn Routine™ is exited, the unit will
chirp once followed by a long chirp.
FEATURE
ONE CHIRP
TWO CHIRPS
Current sense
on
off
Current sense delay
5 seconds
5 minutes
Audible arm/disarm
on
off
confirmation
TRANSMITTER LEARN ROUTINE
™