PAGE 2
19 APR 2005
MAN0790-01
2.2
Equipment Setup / Network
•
Interaction with the PCU100 (PCU) requires a
OCS
. Although the PCU does not have a local
operator interface, it does support a remote operator interface through an OCS over a
CsCAN
network.
•
As shown in
Figure 1
, the PCU is connected to a Hewlett Packard (HP) printer with the cable that
comes with the PCU. The cable connects the PCU to
any Hewlett-Packard printer
with IEEE
1284 parallel port and that uses PCL3 or greater.
Note:
Our example uses one PCU, but multiple PCUs can be connected to the CsCAN network.
Figure 1 - PCU Setup in a CsCAN Network
2.3
Interface Configuration Software
Cscape
software is used to interface the PCU to the OCS over a
CsCAN network
.
2.4 Ladder
Programming
You need to build a ladder program (subroutine or sequence) that uses NETPUT and NETGET to
configure and control the PCU. Examples of ladder code programs are shown in
Figures 3 through 6.
Also, refer to
Tables 1 through 2
.
OCS
Controller
PCU100
HP Printer
Configured over
CsCAN Network
Cable
(Sent with PCU.)
-Configure with
Cscape Software.
-Program with Ladder
Code.
