LMAN0032-01-EN
ETG-WLL INSTALL SHEET
10/12/2015
No part of this publica
�
on may be reproduced without the prior agreement and wri
�
en permission of Horner Ligh
�
ng Group, LLC. Informa
�
on in this document is subject to change without no
�
ce.
Page 4
4) Clip a reflector lock on each end of the tube by pressing down evenly in the center (refer to
arrows in figure 2), locking them into place.
5) Remove protective coating from the reflector prior to powering on the light.
