LMAN0032-01-EN
ETG-WLL INSTALL SHEET
10/12/2015
No part of this publica
�
on may be reproduced without the prior agreement and wri
�
en permission of Horner Ligh
�
ng Group, LLC. Informa
�
on in this document is subject to change without no
�
ce.
Page 5
6) Clean reflectors with a non-abrasive mild soap or neutral PH cleaner to rid them any installation
smudges.
4. WIRING
WARNING
Risk of electrical shock
. Disconnect power before servicing or installing product.
Risque de choc électrique.
Coupez l'alimentation avant l'entretien ou l'installation du produit.
Make all electrical connections in accordance with the National Electrical Code and local code
requirements.Verify that supply voltage is correct by comparing it to the nameplate.
The wire lead from the luminaire power supply should be connected to the service wiring.
The standard power supply will have the following connections:
Wire Color
Function
Green/Yellow
Ground
Brown
A/C Live
Blue
A/C Neutral
If the 0-10V dimming option is added, the following two-wire terminal block will be added to the luminaire:
Wire Color
Function
Blue
DIM +
White
DIM -
5. CLEANING
To maintain efficiency, the LEDs
should be cleaned with a mild soap or neutral PH cleaner.
Abrasives
or cleaners containing chlorinated or aromatic hydrocarbons should not be used. Once clean, rinse with
cold water and wipe dry with a soft cloth.
6. TECHNICAL SUPPORT
Tel:
317 916-4274
Fax
: 317 639-4279
Web:
http://www.hornerlighting.com
:
