HORNER - SUREGRIP INSTRUCTION MANUAL
Setting the Throw
For a right-handed shearer
you will first position the
cutter as far right as the
throw will allow.
For a left-handed shearer
you will first position the
cutter as far left as the throw
will allow.
Secondly, adjust the comb so
that the outside edge of both
the comb and cutter align.
Using your thumb on the
drive cogs, move the cutter
from side to side and ensure
that the inner two teeth of
the cutter both pass over the
central tooth of the comb
completely on each side.
LONGHORN
LONGHORN
Central tooth
Finally, firmly tighten the comb screws.
Ensuring that the cutter passes over the central tooth of
the comb on both sides completely will result in a cleaner
cut.
COMB AND CUTTER SET UP
6
