HORNER - SUREGRIP INSTRUCTION MANUAL
COMB AND CUTTER SET UP
5
Setting the Lead
Adjust the comb so that as the cutter travels over the comb’s
central tooth, at least 1.5 mm of the comb tooth’s flat ground
surface is clear of the cutter’s tip.
1.5mm
Central
tooth
Turn over your handpiece and place your cutter onto the
comb. The sharpened sides of both the comb and cutter
should face each other. Locate the cutter onto the conical pins
on the forks.
Secure the cutter by turning
the tension knob clockwise.
Apply enough tension to
secure the cutter, but ensure
that you can still move the
forks from side to side using
the drive cogs located towards
the back of the handpiece.
1.5mm
Central tooth
Side view
