16. Showers
Your yacht has a hot & cold, fresh-water shower in each head and on the
transom.
If the engine has been running, the hot water can be very hot – be cautious!
In order to use the showers, the fresh-water pump must be activated on the
12V panel. There are 2 fresh water pump switches, one for each hull.
Ensure the relevant switch is on for the shower pump to operate.
To operate the shower-drain pump, make sure the shower drain switch is on.
There are two switches, one for each hull. The shower drains are manual, so
once some water has collected in the bottom of the shower you must press
the drain button until the water has drained away. The button is located
next to the head.
Transom Shower
The valves below the shower head will switch the water on and also control
the temperature of the water. The red valve controls the hot water and the
blue valve the cold water.
To use the shower head simply pull it out and press the button on the back.
If no water comes out make sure that the 12V water switch is on, that the
shower hose is not kinked and that valves are open sufficiently.
Water flow and
temperature
control switches
Shower head
