14. Fresh water system
Fly Bye is equipped with three interconnected water tanks with a combined
capacity of 240 gallons.
Before filling the tank let the water run from the hose for a while before
placing the end into the filler. Please ensure that the correct fillers are used,
NOT the holding tanks or the diesel fill.
To use the fresh water system, turn on the fresh water breaker on the 12v
panel and open a faucet. When the tanks runs out of water the pump will
run at high speed and the faucet will start to cough air. As soon as you hear
the pump running continuously, check to see if anyone is using water. If not,
switch off the pump immediately to prevent the pump from drawing more air
into the system or the pump overheating.
The water gauge is located at the top middle of the 12v panel.
