background image

1. Press the Scroll and Channel keys at the same time and hold. 
2. Turn the transmitter power switch on to enter System mode. 
3. If "MDL" does not appear on the screen, press the Scroll key until "MDL" appears. 
4. Press the Increase or Decrease keys to select the desired model number (1 or 2). 
5. Press the Scroll key to access the Model Name Entry function. 
6. To exit System mode, either turn the transmitter power switch off or press the Scroll 
and Channel keys at the same time. 
 

Model Name Entry 
(System Mode) 

The XR2i allows a three-character name to be input for each of the two models available. 
The current model with name will then be displayed in the Normal display screen. This 
feature is useful to help identify different models, setups, etc. 

 
Accessing the Model Name 
Entry Function 

1. Press the Scroll and Channel keys at the same time and hold. 
2. Turn on the transmitter power switch to enter the System mode. 
3. Press the Scroll key until "MD1" appears on the screen with the first character 
flashing. 
4. Press the Increase or Decrease keys to select the correct letter/number for the first 
character (flashing).  
5. To change the remaining two characters, press the Channel key until the desired 
character to be changed is flashing. 
6. Press the Scroll key to access the Grip Button C function. 
7. To exit the System mode, either turn the transmitter power switch off or press the 
Scroll and Channel keys at the same time. 

 
page break___________***************_____**********_____**********______**********_______________ 

 

Grip Button C Function Select (System Mode) 

The Grip Button C function of the XR2i allows you to select from 2 different functions 
available. Use the information below to select the correct Grip Button C assignment for 
your particular installation. 
 
0 = The 0, or off function, is the default setting and does not assign a function to Grip 
Button C.  
 
Eb = The Eb or Emergency Steering Button function is designed to override the value of 
Grip Dial B and provide 100% steering rate. This feature is useful if you have reduced 
the steering rate to make your vehicle easier to drive but need full steering in an 
emergency situation such as a collision. 

 

Accessing the Grip Button C Function 

1. Press the Scroll and Channel keys at the same time and hold. 

Summary of Contents for XR2i




















Reviews: