Horizon Hobby Vibe 500e, Assembly Instructions Manual

Page: 34 / 76

34
E) Servo Reversing
Move the roll selector and highlight REV.SW on the screen, then press the roll selector to enter the function.
Next, reverse channel 2 by moving the roll selector, and pressing as needed to change from NORM to REV. Press
the LST key to return to the menu.
F) Travel Adjustment
Move the roll selector until TRVL ADJ is highlighted on the screen, then press the roll selector to enter the
function. Adjust the values as shown by moving the roll selector to highlight the desired channel, while using
the control stick to select up/down, or left/right values to be adjusted. Please note that the required travel values
will vary based on the type of servo selected. Press the LST key to return to the menu.
G) CCPM Settings
Move the roll selector to highlight the SWASH MIX function, then press the roll selector to enter the function. Set
the value of the aileron, elevator, and pitch functions from the factory default setting using the rolling selector.
Press the LST key to return to the menu.