EN
13
SAFE Setting menu.
The
First Time SAFE Setup
should be suffi cient to fl y your airplane, but to fi ne
tune the SAFE system there are many setup and tuning options.
Select
Forward Programming
->
Gyro Settings
->
SAFE Settings
->
• SAFE
Gains
can be fi ne tuned for each axis within each Flight Mode.
• Angle
Limits
can be changed for each fl ight mode
• Fixed/ Adjustable Gain
operates the same as this feature in AS3X, but
applies to SAFE gain. You can assign a separate SAFE gain channel for roll
and pitch if you have enough free channels. Use a different gain channel for
SAFE gain than what you have assigned for AS3X. It is possible to have up
to fi ve different channels assigned for fi ne tuning gain. AS3X roll, pitch and
yaw, and SAFE roll and pitch. If you are limited by channels, make your gain
changes within Forward Programming.
• Capture Gyro Gains
operates the same as this feature in AS3X, but applies
to SAFE operation
(AS3X) System Setup
Select
Forward Programming
->
Gyro Settings
->
System Settings
->
• Relearn Servo Settings
can be accessed if any changes are made to the
model confi guration outside of Forward Programming. If any changes are
made to servo reversing, travel, sub-trim, wing type or tail type, you can
execute this function instead of restoring factory defaults and redoing the
entire setup.
• Orientation
can be changed from this menu if the receiver mounting is changed.
• Gain
Channel
enables you to change the channel you are using to manage gain.
• SAFE/Panic Mode Setup
1.
Panic
Select a channel to trigger Panic mode. Chose any channel that is not
used for a control surface, throttle, fl ight modes, or gain. We recommend
assigning the momentary I button for Panic.
Delay
will cause a two second delay when exiting panic mode
Panic Flight Mode
selects a Flight Mode to pull the gain values from for
Panic operation; select a Flight Mode that is setup with SAFE
Roll and Pitch
values on this page represent angle limits while in Panic mode.
2.
Throttle To Pitch
Low Thr to Pitch Threshold
determines the trigger point below which
the airplane will descend nose down at the chosen angle.
High Thr to Pitch Threshold
determines the trigger point above which
the airplane climbs at the chosen angle.
3.
Attitude Trim
allows you to redo the Capture Level Flight Attitude, and/or
manually fi ne tune the values based on fl ight testing.
4.
SAFE Failsafe Flight Mode
allows you to select a fl ight mode (with
SAFE confi gured) to act as a failsafe mode. Making this selection enables
SAFE Failsafe.
5.
Failsafe Angles
determine the attitude the aircraft will maintain in the
event of a failsafe. Set pitch and bank angles to hold the aircraft in a
gentle gliding turn, preventing a fl yaway.
• Utilities
->
Copy Flight Mode Settings
Select a Source and Target Flight Mode to transfer all Flight Mode settings
from one Flight Mode to another. All settings in the Target Flight Mode will be
overwritten.
