background image

24

EN

DE

FR

IT

25

EN

DE

FR

IT

Compliance Information for the European Union

Declaration of Conformity

 

(in accordance with ISO/IEC 17050-1)
 

No. HH20100032401 

Product(s):  

PKZ Night Vapor RTF 

Item Number(s): 

PKZU1100 

Equipment class: 

1

The object of declaration described above is in conformity with the requirements of the specifications listed 

below, following the provisions of the European R&TTE directive 1999/5/EC:

EN 300-328 

 

Technical requirements for Radio equipment.

EN 301 489-1, 301 489-17 

General EMC requirements

EN 60950  

 

Safety

Signed for and on behalf of: 

 

 

Steven A. Hall 

Vice President 

International Operations and Risk Management 

Horizon Hobby, Inc.

 

Horizon Hobby, Inc. 

Champaign, IL USA 

March 24, 2010

Declaration of Conformity

 

(in accordance with ISO/IEC 17050-1)
No. HH2010032402 

Product(s):  

PKZ Night Vapor BNF 

Item Number(s): 

PKZU1180 

Equipment class: 

1

The object of declaration described above is in conformity with the requirements of the specifications listed 

below, following the provisions of the European R&TTE directive 1999/5/EC:

EN 301 489-1, 301 489-17 

General EMC requirement

s

Signed for and on behalf of:  

 

Steven A. Hall 

Vice President 

International Operations and Risk Management 

Horizon Hobby, Inc.

 

Horizon Hobby, Inc. 

Champaign, IL USA 

March 24, 2010

Instructions for Disposal of WEEE by Users in the European Union

This product must not be disposed of with other waste. Instead, it is the user’s responsibility 

to dispose of their waste equipment by handing it over to a designated collection point for the 

recycling of waste electrical and electronic equipment. The separate collection and recycling of 

your waste equipment at the time of disposal will help to conserve natural resources and 

ensure that it is recycled in a manner that protects human health and the environment. For more information 

about where you can drop off your waste equipment for recycling, please contact your local city office, your 

household waste disposal service or where you purchased the product.

 
© 2010 Horizon Hobby, Inc.

ParkZone

®

 products are distributed exclusively by Horizon Hobby, Inc.

US patents D578,146.  7,391,320.

PRC patent number ZL 2007 2 0069025.2

Other patents pending

DSM and DSM2 are trademarks or registered trademarks of Horizon Hobby, Inc.

The Spektrum trademark is used with permission of Bachmann Industries, Inc.

Summary of Contents for Night Vapor BNF














Reviews: