background image

says something other than ON, press the select key to make the arrow point at SW, and press the 
increase key until it says ON. 
 
To set up the second mix, we will use program mix 4.  Enter program mix 4.  Press the increase key 
until the first channel says FLAP.  Then press the select key to make the arrow point at the second 
channel, and then press the increase key until the second channel says GEAR.  Press the select key until 
the arrow points at OFFSET.  Press the decrease key until it says –50 next to OFFSET.  Press the select 
key until the arrow points at RATE, then flap the flap switch into the LAND position, then press the 
increase key until the percentage says +60% (adjust this percentage as necessary to get the ailerons to 
move as “spoilers” ¾” up, keeping in mind that the value of this program mix must by double the value 
and opposite of the value in the previous mix, program mix 3).  Next to SW on the screen it should say 
ON.  If it says something other than ON, press the select key to make the arrow point at SW, and press 
the increase key until it says ON. 
 
 

Reviews: