background image

EN

Declaration of Conformity

(in accordance with ISO/IEC 17050-1)
   
No. HH2013041301U1

Product(s): 

 

PKZ Focke-Wulf 190A BNF Basic

Item Number(s): 

 

PKZ6250

Equipment class: 

 

1

The object of declaration described above is in conformity with the require-
ments of the specifi cations listed below, following the provisions of the 
European R&TTE directive 1999/5/EC:

EN 301 489-1  V1.7.1: 2006
EN 301 489-17 V1.3.2: 2008

Signed for and on behalf of: 
Horizon Hobby, Inc.
Champaign, IL USA
Apr 13, 2013

(in accordance with ISO/IEC 17050-1)

No. HH2013041302

Product(s): 

 

PKZ Focke-Wulf 190A PNP

Item Number(s): 

 

PKZ6275

Equipment class: 

 

1

The object of declaration described above is in conformity with the require-
ments of the specifi cations listed below, following the provisions of the EMC 
Directive 2004/108/EC:

EN55022:2010 + AC:2011
EN55024:2010

Signed for and on behalf of: 
Horizon Hobby, Inc.
Champaign, IL USA
Apr 13, 2013

Steven A. Hall

Executive Vice President and Chief Operating Offi cer

International Operations and Risk Management

Horizon Hobby, Inc.

Compliance Information for the European Union

Instructions for disposal of WEEE by users in the European Union

This product must not be disposed of with other waste. Instead, it is the user’s responsibility to dispose of their waste equipment by handing it over 
to a designated collections point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste 
equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and 
the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city offi ce, your 
household waste disposal service or where you purchased the product.

Steven A. Hall

Executive Vice President and Chief Operating Offi cer

International Operations and Risk Management

Horizon Hobby, Inc.

Declaration of Conformity

Country of Purchase

Horizon Hobby 

Address

Phone Number/Email Address

United States of America

Horizon Service Center
(Air)

4105 Fieldstone Rd
Champaign, Illinois
61822 USA

888-959-2305
Online Repair Request:
visit www.horizonhobby.com/service

Horizon Product Support
(All other products)

4105 Fieldstone Rd
Champaign, Illinois
61822 USA

877-504-0233
[email protected]

United Kingdom

Horizon Hobby Limited

Units 1-4 Ployters Rd
Staple Tye
Harlow, Essex
CM18 7NS, United Kingdom

+44 (0) 1279 641 097
[email protected]

Germany

Horizon Technischer Service

Christian-Junge-Straße 1
25337 Elmshorn, Germany

+49 (0) 4121 2655 100
[email protected]

France

Horizon Hobby SAS

11 Rue Georges Charpak
77127 Lieusaint, France

+33 (0) 1 60 18 34 90
[email protected]

China

Horizon Hobby – China

Room 506, No. 97 Changshou Rd.
Shanghai, China, 200060

+86 (021) 5180 9868
[email protected]

Warranty and Service Contact Information

17

Summary of Contents for Focke-Wulf 190A





















Reviews: