EN
11
BNF Basic/PNP
Post Flight
1. Disconnect the fl ight battery from the fl ight controller
(Required for safety and battery life).
2. Power OFF the transmitter.
3. Remove the fl ight battery from the aircraft.
4. Recharge the fl ight battery.
5. Repair or replace all damaged parts.
6. Store the fl ight battery apart from the aircraft and monitor the battery charge.
7. Make note of the fl ight conditions and fl ight plan results, planning for
future fl ights.
PNP Receiver Selection and Installation
The V-22 Osprey uses the Spektrum
™
DSMX
®
serial receiver (SPM4648),
included in the BNF-Basic aircraft.
Installation of a DSMX serial receiver
1. Remove the bottom cover from the fuselage.
2. Attach the serial receiver lead to the receiver and to the fl ight control board.
3. Mount the receiver inside the fuselage using double-sided servo tape or
hook and loop material.
4. Tape the antennas to the inside of the fuselage away from the wiring.
5. Replace the bottom fuselage cover.
BOTTOM VIEW
Plug the receiver cable into the fl ight controller
here. The receiver cable is not included with the
aircraft, it is included with SPM4648 receiver.
S
+
–
S
+–
S
+
–
S
+
–
S
+–
S
+
–
S
+
–
S
+
–
S
+
–
