EN
7
Radio Antenna Installation
1. Use medium CA to glue the Radio Antenna
(A)
in the slot in the top of the
fuselage halfway between the canopy and the tail.
Model Assembly
Continued
A
Propeller Installation
WARNING:
Do not install the propeller until all system setups are
complete. Failure to heed this warning could result in severe personal
injury.
1. Install the 4 propeller blades
(A)
onto the spinner backplate
(B)
using 8
screws (3x20mm)
(C)
and 8 nuts
(D)
. The propeller’s yellow tips must face
out from the motor for correct propeller operation.
2. Install the spinner backplate onto the propeller shaft
(E).
Make sure the hex of
the backplate properly seats into the hex at the base of the propeller shaft.
3. Install the propeller washer
(F)
and spinner nut
(G)
onto the propeller shaft.
Secure the propeller assembly into place by tightening the spinner nut with
a wrench.
4. Align and install the spinner
(H)
with a screw (3x30mm)
(I)
.
B
A
C
E
F
D
H
G
C
F
H
G
I
3 X 30mm
3 X 20mm (8)
