EN
5
Horizontal Tail Installation
1. Slide the horizontal tail into the tail opening in the rear of the fuselage.
Ensure the control horn faces down.
2. Center the horizontal tail and then secure into place using the 3 included
(3x40mm) screws
(A)
.
3. Connect the z-bend end of the control linkage to the second hole of the servo
arm (
B
).
4. Connect the ball link (
C
) to the ball (
D
) installed on the elevator’s control horn
using pliers or ball link pliers. Ensure the elevator servo arm is in the correct
position.
When needed, disassemble in reverse order.
Model Assembly
C
D
3 X 40mm (3)
A
