EN
7
WARNING:
Before proceeding, remove the spinner and propeller from the motor shaft. Never attempt to
program the radio components, assemble the aircraft or perform maintenance of any kind without
removing the propeller or engaging throttle cut. Serious injury could result if the motor starts inadvertently with
the propeller still attached.
Model Assembly
Horizontal Stabilizer Installation
1. Slide the stabilizer in from the left side of the fuselage with the elevator control
horn facing up.
2. Secure the stabilizer using two (2) M2 x 10mm machine screws, one on each
side.
3. Connect the elevator pushrod to the outside hole on the elevator control horn,
and slide the clevis retainer into place.
M2 x 10 mm
Machine Screw
Landing Gear Installation
1. Slide the landing gear into the fuselage guide, continuing into the lower wing
mount structure.
2. Snap the landing gear into place.
1
2
3
4
