background image

EN

RV-7 1.1m

14

Eratix 3D Flat Foamy 860mm

Limited Warranty

What this Warranty Covers

Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the product 

purchased (the “Product”) will be free from defects in materials and workmanship at 

the date of purchase.

What is Not Covered

This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage 

due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to 

improper use, installation, operation or maintenance, (iii) modification of or to any part 

of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized 

service center, (v) Product not purchased from an authorized Horizon dealer, or (vi) 

Product not compliant with applicable technical regulations, or (vii) use that violates 

any applicable laws, rules, or regulations.

OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY 

OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, 

INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER 

ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL 

SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE. 

Purchaser’s Remedy

Horizon’s sole obligation and purchaser’s sole and exclusive remedy shall be that 

Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by 

Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) 

involved in a warranty claim. Service or replacement decisions are at the sole 

discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE 

OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER’S 

SOLE AND EXCLUSIVE REMEDY. 

Limitation of Liability

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR 

CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL 

LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, 

WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF 

LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH 

DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price 

of the Product on which liability is asserted. As Horizon has no control over use, setup, 

final assembly, modification or misuse, no liability shall be assumed nor accepted for 

any resulting damage or injury. By the act of use, setup or assembly, the user accepts 

all resulting liability. If you as the purchaser or user are not prepared to accept the 

liability associated with the use of the Product, purchaser is advised to return the 

Product immediately in new and unused condition to the place of purchase.

Law

These terms are governed by Illinois law (without regard to conflict of law principals). 

This warranty gives you specific legal rights, and you may also have other rights which 

vary from state to state. Horizon reserves the right to change or modify this warranty 

at any time without notice.

WARRANTY SERVICES

Questions, Assistance, and Services

Your local hobby store and/or place of purchase cannot provide warranty support 

or service. Once assembly, setup or use of the Product has been started, you must 

contact your local distributor or Horizon directly. This will enable Horizon to better 

answer your questions and service you in the event that you may need any assistance. 

For questions or assistance, please visit our website at www.horizonhobby.com, 

submit a Product Support Inquiry, or call the toll free telephone number referenced in 

the Warranty and Service Contact Information section to speak with a Product Support 

representative. 

Inspection or Services

If this Product needs to be inspected or serviced and is compliant in the country you 

live and use the Product in, please use the Horizon Online Service Request submission 

process found on our website or call Horizon to obtain a Return Merchandise 

Authorization (RMA) number. Pack the Product securely using a shipping carton. 

Please note that original boxes may be included, but are not designed to withstand 

the rigors of shipping without additional protection. Ship via a carrier that provides 

tracking and insurance for lost or damaged parcels, as Horizon is not responsible for 

merchandise until it arrives and is accepted at our facility. An Online Service Request 

is available at http://www.horizonhobby.com/content/service-center_render-service-

center. If you do not have internet access, please contact Horizon Product Support to 

obtain a RMA number along with instructions for submitting your product for service. 

When calling Horizon, you will be asked to provide your complete name, street 

address, email address and phone number where you can be reached during business 

hours. When sending product into Horizon, please include your RMA number, a list of 

the included items, and a brief summary of the problem. A copy of your original sales 

receipt must be included for warranty consideration. Be sure your name, address, and 

RMA number are clearly written on the outside of the shipping carton. 

NOTICE:

 

Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo 

battery, please contact the appropriate Horizon Product Support office.

Warranty Requirements

For Warranty consideration, you must include your original sales receipt 

verifying the proof-of-purchase date.

 Provided warranty conditions have been 

met, your Product will be serviced or replaced free of charge. Service or replacement 

decisions are at the sole discretion of Horizon.

Non-Warranty Service

Should your service not be covered by warranty, service will be completed 

and payment will be required without notification or estimate of the expense 

unless the expense exceeds 50% of the retail purchase cost

. By submitting 

the item for service you are agreeing to payment of the service without notification. 

Service estimates are available upon request. You must include this request with your 

item submitted for service. Non-warranty service estimates will be billed a minimum 

of ½ hour of labor. In addition you will be billed for return freight. Horizon accepts 

money orders and cashier’s checks, as well as Visa, MasterCard, American Express, 

and Discover cards. By submitting any item to Horizon for service, you are agreeing to 

Horizon’s Terms and Conditions found on our website http://www.horizonhobby.com/

content/service-center_render-service-center. 

ATTENTION: 

Horizon service is limited to Product compliant in the country of use 

and ownership. If received, a non-compliant Product will not be serviced. Further, the 

sender will be responsible for arranging return shipment of the un-serviced Product, 

through a carrier of the sender’s choice and at the sender’s expense. Horizon will hold 

non-compliant Product for a period of 60 days from notification, after which it will be 

discarded.

10/15

Contact Information

Country of Purchase

Horizon Hobby

Contact Information

Address

United States of America

Horizon Service Center (Repairs and Repair Requests)

servicecenter.horizonhobby.com/RequestForm/

2904 Research Rd  

Champaign, Illinois, 61822 USA

Horizon Product Support (Product Technical Assistance)

[email protected]

877-504-0233

Sales

[email protected]

800-338-4639

European Union

Horizon Technischer Service

[email protected]

Hanskampring 9 

D 22885 Barsbüttel, Germany

Sales: Horizon Hobby GmbH

+49 (0) 4121 2655 100

Summary of Contents for E-flite Eratix 3D Flat Foamy 860mm

















Reviews: