8
EN
Installing the Flight Battery
CAUTION:
Always disconnect the Li-Po battery from the quadcopter when not fl ying to
avoid over-discharging the battery. Batteries discharged to a voltage lower than the lowest
approved voltage may become damaged, resulting in loss of performance and potential fi re when
batteries are charged.
1. Set the motor arm switch to OFF
(position 1).
2. Lower the throttle.
3. Power on the transmitter.
4. Attach hook material to the quadcopter
frame and loop material to the battery.
5. Install the fl ight battery on the quadcopter
frame and secure it with the hook and
loop strap.
6. Connect the battery cable to the aircraft
power lead, noting correct polarity.
CAUTION:
Connecting the battery to
the aircraft power lead with reversed
polarity will cause damage to the power
distribution board, ESCs and the battery.
Damage caused by incorrectly connecting the
battery is not covered under warranty.
Do not move the quadcopter until the receiver initializes.
7. The quadcopter motors will emit initialization tones, indicating the ESC is armed.
