Horizon Hobby Blade Glimpse, User Manual

Page: 18 / 24

18
EN
Problem Possible Cause Solution
Reduced fl ight time
or is underpowered
Flight battery charge is low Completely recharge the fl ight battery
Inadequate power to fl ight battery
charger Use a different USB power source for the
charger
Flight battery is damaged
Replace the fl ight battery and follow the
fl ight battery instructions
Flight conditions might be too cold
Make sure the battery is warm (room tem-
perature) before use
LED on receiver fl ashes rapidly
and quadcopter will not respond
to transmitter (during binding)
Transmitter too near aircraft during
binding process
Power off the transmitter. Move the transmit-
ter a larger distance from the aircraft. Dis-
connect and reconnect the fl ight battery to
the aircraft. Follow the binding instructions
Bind switch or button was not held
while transmitter was powered on Power off transmitter and repeat bind
process
Aircraft or transmitter is too close to
large metal object, wireless source or
another transmitter
Move aircraft and transmitter to another
location and attempt binding again
LED on the receiver fl ashes
rapidly and the quadcopter will
not respond to the transmitter
(after binding)
Less than a 5-second wait between
fi rst powering on the transmitter and
connecting the fl ight battery to the
quadcopter
Leave the transmitter powered on. Discon-
nect and reconnect the fl ight battery to the
quadcopter
The quadcopter is bound to a different
model memory (ModelMatch™ trans-
mitters only) Select the correct model memory on the
transmitter. Disconnect and reconnect the
fl ight battery to the quadcopter
Flight battery or transmitter battery
charge is too low
Replace or recharge batteries
Aircraft or transmitter is too close to
large metal object, wireless source or
another transmitter
Move aircraft and transmitter to another
location and attempt connecting again
Crashes immediately upon
lift-off Propellers in wrong locations or
incorrect fl ight mode selected
Make necessary adjustments