2. Setup and Adjustment
52
2-4 Jog Section Setup
Weights
Sheet Holders
This section shows how to set up weights and
sheet holders.
1.
Open safety covers 1 and 2.
2.
Adjust roller pressure by turning pres-
sure roller adjust knob.
NOTE
- The standard position is where pressure
roller adjust knob is fully turned clockwise.
When sheets wrinkle on transportation,
reduce the pressure by turning pressure roller
adjust knob counterclockwise.
3.
Fix weights at the center of roller in
normal use.
NOTE
- Move weights to left to increase pressure
when thick sheets or many sheets are trans-
ported.
4.
Attach sheets holder when using sheets
whose width is bigger than 182 mm (7.2").
- Loosen fix screw on sheet holders and
adjust the sheet holder height.
NOTE
- Raise sheets holders when using sheets
whose width is smaller than 182 mm (7.2").
5.
Attach transport angle adjust bar when
using smaller size sheets.
NOTE
- Loosen fix screw on the bar and adjust the
bar angle.
Pressure Roller Adjust Knob
Transport Angle Adjust Bar
Safety Cover 1
Safety Cover 2
Transport Angle
Adjust Bar
