24
C O M M O N P R O D U C T Q U E S T I O N S
ARE THE SOUNDS MY ELLIPTICAL TRAINER MAKES NORMAL?
Our elliptical trainers are some of the quietest available because they use belt drives and
friction free magnetic resistance. We use the highest grade bearings and belts to mini-
mize noise. However, because the resistance system itself is so quiet, you will occasion-
ally hear other slight mechanical noises. Unlike older, louder technologies, there are no
fans, friction belts, or alternator noises to mask these sounds on our elliptical trainers.
These mechanical noises, which may or may not be intermittent, are normal and are
caused by the transfer of significant amounts of energy to a rapidly spinning flywheel.
All bearings, belts and other rotating parts will generate some noise which will transmit
through the casing and frame. It is also normal for these sounds to change slightly dur-
ing a workout and over time because of thermal expansion of the parts.
WHY IS THE ELLIPTICAL TRAINER I HAD DELIVERED LOUDER THAN THE ONE
AT THE STORE?
All fitness products seem quieter in a large store showroom because there is generally
more background noise than in your home. Also, there will be less reverberation on a car-
peted concrete floor than on a wood overlay floor. Sometimes a heavy rubber mat will
help reduce reverberation through the floor. If a fitness product is placed close to a wall,
there will be more reflected noise.
HOW LONG WILL THE DRIVE BELT LAST?
The computer modeling we have done indicated virtually thousands of maintenance free
hours. Belts are now commonly used in far more demanding applications such as motor-
cycle drives.
CAN I MOVE THE TRAINER EASILY ONCE IT IS ASSEMBLED?
Your Horizon Fitness Elliptical Trainer has a pair of transport wheels built into the front
legs. It is easy to move your Elliptical Trainer by rolling it on the front transport wheels.
It is important that you place your Horizon Fitness Elliptical Trainer in a comfortable and
inviting room. Your Elliptical Trainer is designed to use minimal floor space. Many people
will place their Elliptical Trainers facing the TV or a picture window. If at all possible, avoid
putting your Elliptical Trainer in a unfinished basement. To make exercise a desirable daily
activity for you, the Elliptical Trainer should be in an attractive setting.
25
PROBLEM:
Erratic or Inconsistent Readout.
SOLUTION:
This is often caused by dry electrodes or a loose chest strap. Moisture on the
rubber electrodes is required for proper operation. Try a more generous coating of water
on the electrodes and tightening the chest strap.
Check your exercise environment for sources of interference such as high power lines,
large motors, etc.
You may experience an erratic readout under the following conditions:
- Gripping the heart rate handlebars too tight. Try to maintain moderate pressure while
holding onto the heart rate handlebars.
- Constant movement and vibration due to constantly holding the heart rate grips while
exercising.
- When you are breathing heavily during a workout.
- When your hands are constricted by wearing a ring.
- When your hands are dry or cold. Try moistening your palms or rubbing them togeth-
er to warm.
- Anyone with heavy arrhythmia.
- Anyone with arteriosclerosis or peripheral circulation disorder.
- Anyone whose skin on the measuring palms is especially thick.
Note:
Outside interference sources such as computers, motors and fluorescent
lights may cause the heart rate reading to be erratic.
If the above troubleshooting section does not remedy the problem,
discontinue use and turn the power off.
Please contact your local dealer for further assistance.
