10
(4) Attach solenoid connector B to the connector on
the conveyor.
(5) Attach solenoid connector C to the left connector
on the QC-S300/QC-S30.
(6) Insert connector cables into the duct of the middle
conveyor.
4.
Attach the bin shelves, beginning at the
bottom by following the steps below.
(1) On the drive side of each bin shelf, an arm fits
under a pin inside the machine. A pin on the bin
shelf fits into a notch in the frame of the machine.
(2) On the near side of the machine, fit the arm under
the pin inside the machine. A pin on the bin shelf
fits into a U-shaped cutout on the machine frame.
(3) Swing the bin shelf down to lock it in position.
(4) Install all of the other bin shelves by repeating the
steps 1 through 3.
How to Install Multiple QC-S300F/QC-S30F Collators
21101
20102G1
Connector C
Connector B
21101
20102H1
Pin
Arm
21101
20102E1
U-shaped Cutout
Pin
Arm
21101
20102J1
BIn Shelf
