8
(1) Insert the four pins on the upper conveyor into the
U-shaped cutouts on the middle conveyor.
(1) Attach the rear cover on the QC-S300F/QC-S30F
using two screws.
(2) Remove three screws on the lower left cover of the
QC-S300/QC-S30.
(3) Attach conveyor support plate using the three
screws removed in step (2).
• Fasten the three screws in the tops of the holes so that
the conveyor support plate is positioned as low as
possible.
(4) Lift up all of the conveyors and insert the two
positioning pins on the conveyor support plate into
the two holes on the bottom of the conveyor.
• When inserting the positioning pin, move the QC-
S300/QC-S30.
(5) Attach the lower conveyor using the conveyor
locking plate using two mounting screws.
How to Install Multiple QC-S300F/QC-S30F Collators
Attach the upper conveyor to the middle
conveyor.
21101
20101W1
Upper
Conveyor
Middle
Conveyor
U-shaped
Cutout
Connecting the QC-S300/QC-S30 and the
QC-S300F/QC-S30F
21101
20101X1
Rear Cover
21101
20101Y1
Lower Left Cover
Conveyor
Support Plate
21101
20101Z1
Bottom
of Set
Conveyors
Positioning
Pins
21101
20102A1
Bottom of Conveyor
Assembly
Conveyor Locking Plate
