(5)
Operating
Procedures
Ready
Safety Cover Open
Cutting
11"x17"
2
Ready
Cutting
Safety Cover Open
Operating Procedures
This section explains how to operate the machine.
Rear View
Power Switch
Monitor LED's
Key
Back-gauge
Back-gauge Adjusting Knob
Safety Cover
Cut Line
Turn on the power switch.
Turn on the key switch.
Insert the key and turn it to the right.
The "Ready" LED
lights.
If the knife is not at the starting position, the
"Cutting" LED
will light.
See page 10 .
Set the back-gauge to the cutting
length.
The back-gauge can be moved forward or back
using the adjusting knob. Use the scale to set the
back-gauge.
Place the sheets.
Open the safety cover, and place the sheets so
that the edge of stack touches the back-gauge.
The sheets will be cut along the lighted cut line.
While the safety cover is open, the
LED
will blink.