(6)
1
Operating Procedures
Cutting
Cutting Button
Trim Drawer
Sheet Pusher Lever
Dispose of the trim.
WARNING
If some trim is stuck to the
knife, remove it using a brush
to prevent your hands or
fingers from touching the
knife directly.
Remove the cut sheets.
Push the sheet pusher lever to the front. The cut
sheets will move forward so you can remove them.
WARNING
Do not touch the knife above
the cut sheet.
Close the safety cover.
If the cover remains open, the machine will not
run.
Once the cover is closed, the
LED will
go out.
Cut the sheets.
Press the both cutting buttons at the same time
and keep pressing until the cutting is done.
- If one of the cutting button is released
while the machine is cutting, the cutting
will stop and the knife will automatically
return to the starting position.
- While the "Cutting" LED
is lit, the
safety cover is locked and can not be
opened.