!
5
LampizatOr- The Horizon DAC Manual
The description of REMOTE CONTROL unit
functions for “Kallas” systems as used in the PACIFIC DAC.
Our remote control is made of metal and is custom made for our
volume control system. The batteries are of “coin” type and do not
live too long, it is advisable to keep a fresh unopen battery type
CR2032 in your storage, we think the batteries need to be changed
once per year.
Batteries are accessible after un-screwing the bottom of the remote
unit.
ON powers up/down the whole DAC but the Remote Control
processing circuit remains powered even after switch off . If you
switch off by the rear power button - it also powers down the remote
circuit therefore it will be impossible to switch the DAC on via remote.
VOL+ VOL- changes the volume from complete MUTE (-63 dB) to
complete bypass - 0 dB in 64 smooth steps.
On the Horizon’s Nixie display - the 00 represent muting, 01 is minus
63 dB sound and 62 is the loudest volume setting. One step up - 63
means full gain, volume bypass mode. The absolute volume level
depends on the tube choice and may vary from model to model.
Input - and Input +- changes the analog and digital inputs to the tube
section.
1 = SPDIF, 2 = AESEBU, 3 = Toslink, 4 = USB, 5 = HDMI i2S, 6 =
RJ45 i2S, 7 = Analog RCA input, 8 = analog XLR balanced input
MUTE does just that - mute. After pressing again - the DAC will go
back to the last volume used. Touching the Vol-Up and Vol Down
functions will un-mute automatically.
The volume levels (last used) are remembered.
The DAC by default will start on USB (number 4) input.
Changing the input will switch the display for 3 seconds to the input mode, and then it will
jump back to showing the volume.
of
5
32
IN—
IN +
MUTE
VOL -
VOL +
ON/OFF
Lampizator
