manualshive.com logo in svg

Horizon Fitness Elite T5, Service Manual

Share
Download
Horizon Fitness Elite T5 Service Manual Download Page 23

 23 

 

                                                   

    CHAPTER 4  Basic Machine Maintain

 

4.6 MAINTENANCE 

 

     

MAINTENANCE SCHEDULE 

 

 

ACTION

 

FREQUENCY 

 

 Clean underneath the treadmill:  

▓

Turn off the treadmill with the ON/OFF switch, then unplug the power cord at the 

wall outlet.  

▓

Fold the treadmill into the upright position, making sure that the lock latch is secure.  

▓

 Move the treadmill.  

▓

 Wipe or vacuum any dust particles or other objects that may have accumulated un-

derneath the treadmill.  

 

 

 

     WEEKLY  

       

 

IMPORTANT!  

▓

Turn off the treadmill with the ON/OFF switch, then unplug the power cord at the 

wall outlet. Wait 60 seconds.  

▓

Inspect all assembly bolts of the machine for proper tightness.  

▓

 Remove the motor cover. Wait until ALL display screens turn off.  

▓

 Clean the motor and lower board area to eliminate any lint or dust particles that 

may have accumulated. Failure to do so may result in premature failure of key electri-
cal components.  

▓

Wipe down the belt with a damp cloth. Vacuum any black/ white particles that may 

accumulate around the unit. These particles may accumulate from normal treadmill 
use.  

▓

If your treadmill has air shocks under the deck for lift assistance, lubricate the silver  

air shock tube with Teflon-based spray found at your local hardware or bike store. 

 

     

 

 

 

 

 

     MONTHLY 

 

Summary of Contents for Elite T5

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands