19
18
ELLIPTICAL OPERATION
This section explains how to use your elliptical’s console and programming.
The BASIC OPERATION section in the ELLIPTICAL GUIDE has instructions for the following:
•
LOCATION OF THE ELLIPTICAL
•
POWER/GROUNDING INSTRUCTIONS
•
FOOT POSITIONING
•
MOVING THE ELLIPTICAL
•
LEVELING THE ELLIPTICAL
•
POWER/MANUAL INCLINE OPERATION
•
USING THE HEART RATE FUNCTION
ASSEMBLY
STEP 9
18
6
19
5
21
22
12
NOTE: All hardware for this step is pre-installed.
A
Remove 4
PRE-INSTALLED BOLTS (18)
from the
CONSOLE (19)
.
B
Attach the
CONSOLE CABLES (5)
to the
CONSOLE (19)
.
C
Carefully tuck the
CONSOLE CABLES (5)
into the
CONSOLE MAST (6)
before attaching the
CONSOLE
.
Attach
CONSOLE (19)
to
CONSOLE MAST (6)
using
4
PRE-INSTALLED BOLTS (18)
.
D
Slide the
UPPER HANDLEBAR (21)
onto the
LOWER
HANDLEBAR (12)
making sure handlebars are joined
together completely. Secure the
UPPER HANDLEBAR
(21)
to the
LOWER HANDLEBAR (12)
using
PRE-
ATTACHED SET SCREWS (22)
.
E
Repeat STEP D on other side.
NOTE: Make sure upper handlebars are as far down as
possible. Handlebars can be damaged If not secured correctly.
ASSEMBLY COMPLETE!
NOTE: Do not to pinch any wires while attaching the console.
HZ14_OM_NA_CE8.8_Rev1_2.indd 18-19
6/4/14 8:59 AM
