17
16
2
6
4
8
I
J
B
7
5
H
G
NOTE: Be
careful not
to pinch any
wires while
attaching the
console mast.
ASSEMBLY
STEP 3
A
Open
HARDWARE FOR STEP 3.
B
Remove
PRE-INSTALLED BOLTS AND WASHERS (6)
from
MAIN FRAME (2).
C
Carefully pull the
CONSOLE CABLE (4) through the
CONSOLE MAST (5) using the twist tie located inside
the
CONSOLE MAST (5).
D Attach
CONSOLE MAST (5) to MAIN FRAME (2) using
PRE-INSTALLED BOLTS AND WASHERS (6).
E
Slide
WAVY WASHER (G) and FLAT WASHER (H) over
CRANK (7) followed by PEDAL ARM (8) as shown. Rest
pedal arm wheel on guide rail.
F
Attach the
PEDAL ARM (8) to the CRANK (7) using
1
FLAT WASHER (I), 1 SPRING WASHER (B) and 1
BOLT (J).
G Repeat steps E–F on the opposite side of the elliptical.
HARDWARE FOR STEP 3
PART
TYPE
DESCRIPTION
QTY
G
WAVY WASHER
17.2X22.5X0.5T
2
H
FLAT WASHER
16.0X25.0X1.0T
2
I
FLAT WASHER
8.2X30.0X1.5T
2
B
SPRING WASHER
8.2X15.4X2.0T
2
J
BUTTON HEAD BOLT
M8X1.25PX15L
2
HARDWARE FOR STEP 4
PART
TYPE
DESCRIPTION
QTY
K
FLAT WASHER
20.2X27.2X1.5T
4
L
WAVY WASHER
20.7X29.1X0.5T
2
I
FLAT WASHER
8.2X20.0X1.5T
2
B
SPRING WASHER
8.2X15.4X2.0T
2
J
BUTTON HEAD BOLT
M8X1.25PX20L
2
ASSEMBLY
STEP 4
9
10
K
L
K
I
B
J
A
Open
HARDWARE FOR STEP 4.
B
Slide 1
FLAT WASHER (K), 1 WAVY WASHER (L)
and another
FLAT WASHER (K) onto the LOWER
LINK ARM (9).
C
Slide the
LOWER LINK ARM (9) into the PEDAL
ARM BRACKET (10).
D Attach the
LOWER LINK ARM (9) to the PEDAL
ARM BRACKET (10) using 1 FLAT WASHER (I),
1
SPRING WASHER (B) and 1 BOLT (J).
E
Repeat steps B–D on the opposite side of the
elliptical.
