background image

21

20

20

ASSEMBLY 

STEP 7

13

14

15

12

M

15

A  Open 

HARDWARE BAG 7.

B  Slide the right (R) 

UPPER HANDLEBAR (13) onto 

the right 

LOWER HANDLEBAR (12) making sure 

handlebars are joined together completely. Secure 

the 

UPPER HANDLEBAR (13) to the LOWER 

HANDLEBAR (12) using PRE-ATTACHED SET SCREWS 

(14).

C  Slide right (R) 

HANDLEBAR COVERS (15) over UPPER 

HANDLEBARS (13) and attach using 1 SCREW (M).

D  Repeat STEPS B–C on left side.

HARDWARE FOR STEP 7

PART

TYPE

DESCRIPTION

QTY

M

SCREW

M4X0.7PX8L

4

NOTE: Make sure upper handlebars are as far down 

as possible. Handlebars can be damaged If not 

secured correctly.

4

16

19

5

17

18

ASSEMBLY 

STEP 8

NOTE: All hardware for this step is pre-installed.

A  Remove 4 

PRE-INSTALLED BOLTS (16) from the 

CONSOLE (17).

B  Attach the 

CONSOLE CABLES (4) to the  

CONSOLE (17).

C  Carefully tuck the 

CONSOLE CABLES (4) into the 

CONSOLE MAST (5) before attaching the CONSOLE

Attach 

CONSOLE (17) to CONSOLE MAST (5) using 

PRE-INSTALLED BOLTS (16).

D  Slide 

FRONT TOP CAP PIECE (18) and REAR TOP CAP 

PIECE (19) over CONSOLE MAST (5) and snap into 

place.

NOTE:  

Do not to pinch any wires while attaching the console.

Summary of Contents for ANDES 2.0


















Reviews: