P
ART
R
EPLACEMENT
Table of Contents
7.0AT-03
35
Service Manual
Running Deck Replacement
1.
Remove the motor cover as outlined as in Section of Motor cover replacement.
2.
Remove the end cap as in
Section
above
.
3.
Remove rear roller as in
S
ection
above.
4.
Remove the side rail as outlined as in Section of side rail replacement.
5.
Remove the bolts and rail locks on the running deck. The elastomers may come lose.
6. Remove the running deck from the running belt.
7. Reverse Steps 1-6 to install a new running deck.
8. Use the silicone oil that was included with the machine to lubricate the belt and desk. If needed,
contact Customer Technical Support to purchase a new bottle of silicone oil.
NOTE: New deck surfaces must ALWAYS be matched to a new running belt.