24/02/2021
Ver. 5
14
Laying the fire
– 700 Ceramic Log
2. LOCATE L O G N O. 1 :
This is the largest log that is positioned at the rear of
the grate.Two locating pins are positioned at the rear
of the burner. The large log has two holes on the
underside to position in place.
1 . L O C AT E 4 C E R A M I C COALS:
Four ceramic coals are supplied with the burner
base. These coals must be laid in the position
indicated on the drawing with the taller coals on
the ends and smaller coals in-between
3 . LOC ATE LOG
NO’S 2 & 3
:
Two front log no
’s. 2 and 3 are supplied to fit into the space
between the metal frame and the ceramic base. These logs
do not cover the front burner ports but are designed to deflect
the front flame back into the fire
L O G S
P O S I T I O N I N G OF
A L L L O G S
• It is important to follow the log
recommended positioning.
• Not doing so can adversely effect the
operation of the appliance.
• This diagram shows the recommended log
positions, when viewed from above.
Only use logs supplied
by the manufacturer as
other logs may effect
combustion performance
Installation Instructions Kemlan Natural Draft Horizon Edge Gas Fireplaces
