horiba LAQUA Series, Instruction Manual

Page: 45 / 76

Salinity set up
31
● P3 SAL setup
Using P3 SAL setups function of the meter, you can:
• Select salinity unit
• Select salinity curve
• Erase calibration data
To set the salinity functions using LAQUA EC220 handheld meter, follow the procedure detailed
below:
Prerequisites
Switch on the EC meter.
• Default salinity unit is set as ppt . You can change the unit to percentage (%) .
• Default salinity type is set as NaCl . You can change the salinity type to seawater.
• Erasing previous calibration data is recommended for accurate calibration. Default setup is
NO but to erase the calibration data, you need to change the setup to YES .
To return to the measurement mode, press the key.
Note
Tip