![background image](http://html1.mh-extra.com/html/horiba/ht-110/ht-110_instruction-manual_2162223030.webp)
4 Measurement
22
4
Measurement
4.1
Preparation
Confirm the followings with the power turned OFF.
z
There is no error with power supply, alarm and transmission cable.
z
There is no looseness with the terminal board screws.
z
Supply voltage fluctuation is within the range of rated voltage ±10%.
4.2
Starting and ending method of measurement
z
When starting the measurement, turn ON the power switch.
z
When ending the measurement, turn OFF the power switch.
4.3
Measurement
z
Turn OFF the MAINT switch to enter in the measurement mode.
z
When performing various settings or selecting the display screen, turn ON the MAINT
switch.
Note
To perform basic settings, make sure that the MAINT switch is "OFF".
Reference
For the modes, refer to “ 2.3 Mode selection ” (page 9).