Chapter 3 Basic Operation
3.1 Preparation
14
HORIBA
●
Setting the Printer
Refer to the instruction manual of the printer for settings
and operations of the printer.
(1) Set the DIP switch No. 6 to ON and No. 7 to OFF,
and then set printer paper and ink ribbon. Keep the
LF key held down.
(2) Keep the SEL key held down.
The printer prints output when the SEL key is being
pressed.
3.1.5 Connecting the Personal Computer
Personal computer communication connector
・
Use proprietary cables to connect with a personal
computer.
Proprietary cable
Parts name: USB cable (1 m)
Parts No.: 3200373941
・
Make sure that the transfer formats of the measuring
instrument and personal computer are same.
Otherwise, communication may fail due to a
communication error or the online mode start failure.
If you change the transfer formats, power OFF both of
the instrument and the personal computer once, and
then turn on them again.
・
For the details of communication commands, register
with our website and see the free download page of
manuals.
