horiba ABX MICROS ES60, User Manual

Page: 76 / 200

ABX Micros ES60 OT/CT
4–8 User Manual - RAB237AEN
4- Help message corresponding to the system alarm message selected in the table above. This help
message gives corrective actions to perform (See Section 7, 6.1. System alarms, page 7-37 ).
5- A " Startup " button to run a startup cycle if necessary.
◆
Press " OK " button to close the " Status " area and enter " Sample identification " menu (See 4.
Sample identification menu, page 4-12 ).
1.5.2. Functions checked by the instrument
◆
This chapter describes all the functions checked by the instrument. These checks will determine
the status (OK, ALARM or LOCK) for each category.
◆
The analyser functional status is thus determined. It depends on 3 elements:
- the system alarm level
- the user connected (variable according to user profile)
- the locking alarm options set in the "
Settings " menu (See Section 6, 6.5. Analysis running, page
6-14 ).
◆
The following pages will give for each category the analyser functional status and the color of the
"
Status " button. This information is sorted by system alarms triggered according to:
- the profile of the user connected
- the locking alarm options set in the "
Settings " menu
Instrument status
◆
To select the instrument category, press the " Instrument status " button Diag.4-3 .
Tab.4-3 Instrument category alarm messages
◆
Follow the indications displayed in help messages to perform corrective actions. For more detailed
information: See Section 7,
6.1.1. Instrument alarms, page 7-37 .
System alarm messages are displayed in the " Status " area until the problem
is solved.
Diag.4-3 Instrument status button
System alarm message
Status according to
user profile
Locking alarm
options
Status according to
user profile
Lab tech Scientist Lab tech Scientist
Cycle cancelled by user LOCK LOCK N/A
Critical cycle error LOCK LOCK N/A
Startup cycle failed LOCK LOCK N/A
Invalid startup cycle ALARM ALARM
Automatic lock on
analyser alarm
LOCK ALARM
Analyser connection failed LOCK LOCK N/A
Analyser communication
failed
LOCK LOCK N/A
Reagent temperature error ALARM ALARM
Automatic lock on
analyser alarm
LOCK ALARM