horiba ABX MICROS ES60, User Manual

Page: 142 / 200

ABX Micros ES60 OT/CT
6–14 User Manual - RAB237AEN
Tab.6-2 Default values of XB alarms
6.5. Analysis running
◆
The " Running " screen allows to set analysis running modes.
In the " Analys. " tab:
1- Press " Running " radio button.
2- Press " Edit " button.
3- Check the " With RUO data " check box to activate/deactivate RUO data. It is activated by default
(except for US version).
4- Check the " Automatic lock on analyser alarm " check box to activate/deactivate instrument
locking on analyser alarms (reagent temperature, invalid startup). It is deactivated by default
(except for US version).
5- Check the " Automatic lock on reagent alarm " check box to activate/deactivate instrument
locking on reagent alarms. It is deactivated by default (except for US version).
6- Check the " Automatic lock on QC alarm " check box to activate/deactivate instrument automatic
locking on QC alarms (inter QC time limit or invalid QC). It is deactivated by default (except for US
version).
7- Check the " Display startup results " check box to activate/deactivate displaying (at the end of
startup cycle) results of blank cycle runs during the startup. It is activated by default.
8- Check the " Print startup results " check box to activate/deactivate automatic printing results of
blank cycle runs during the startup. It is activated by default.
9- Press " OK " button.
6.6. Identification option
◆
The " Identifi. " screen allows to activate or not automatic identification. This option allows the
instrument to generate automatically sample ID.
In the " Analys. " tab:
1- Press " Identifi. " radio button.
2- Press " Edit " button.
3- Check the " Automatic identification " check box to activate/deactivate automatic identification.
It is deactivated by default.
4- Press " OK " button.
Alarm Min. value Max. value
MCV (µm3) 80 100
MCH (pg) 27 32
MCHC (g/dl) 32 36