Horiba Scientific LAQUAact D-75G, Instruction Manual

Page: 86 / 118

Performing test printing of the printer unit
64
●
Performing test printing of the printer unit
In order to check whether the printer unit is operating correctly or there is a printer
communication problem, you can perform test printing.
Connect the instrument and a printer correctly and perform the following procedure for
test printing. As a result of test printing, if the printout is as shown below, the printer unit
is operating correctly.
1. Press the key to enter the setting mode.
2. Press the keys to select the "MAINT" (maintenance setting) and then press
the key.
3. Press the keys to select the "PRINT" (test print) and then press the key.
Printing starts automatically. The printer icon blinks during printing. When printing
ends, the printer icon lights and "END" appears. Press the
key.
To return to the setting mode, press the key.
key
key
key
Printed