Revision -
21 of 22
Figure 18: Align connector terminals and rotate 1/4 turn.
18.
Use zip ties to secure the chassis harness to the roll cage. Secure the wires to the
coolant pipes under the seat. Make sure the wires are secured away from any
moving suspension components, drive shafts, steering shafts, or hot exhaust.
Work your way from the bulk head connector on the top to the battery. Make sure
you secure the harness into the corner under the driver’s seat so there is room to
re-install the tub.
19.
Re-install the tub under the driver’s seat, the center under seat cover, the seat, the
firewall access panel, and the radiator hood panel.
20.
You are now ready to enjoy the music, lighting, and shade provided by your
Audio Shade
off-road top. Basic operation works as follows:
Turn the vehicle ignition switch on to power up the stereo system.
Press the source button on the stereo receiver to select the input source
from AM/FM radio, Bluetooth, or Auxiliary.
Press and hold the menu button to access the Device Settings menu.
o
Use the Volume knob to change the values for each setting, and
press it to confirm the setting.
Press and hold the Volume knob to access the Audio Settings menu.
o
Use the Volume knob to change the values for each setting, and
press it to confirm the setting.
The front and rear light bars can be used with or without the vehicle’s
ignition switch on. Press the toggle switches to activate each component.
Warning: extended use of the light bars without the vehicle’s charging
system functioning will deplete the battery and the engine may not start.
To control the interior light color or make them dance to the music,
download the Bluetooth app to your iOS or Android device. The app
information is included with your Audio Shade and is located in the zipper
pocket.
