![Hoppe AUDIO SHADE Installation Instructions & Owner'S Manual Download Page 18](http://html.mh-extra.com/html/hoppe/audio-shade/audio-shade_installation-instructions-and-owners-manual_2161918018.webp)
Revision -
18 of 22
Figure 14: Attach the main power / ground wire.
15.
Run the pink ignition wire, with the two attached connectors, through the hole in
the rubber protector (with the factory wire harness). The connectors are accessible
under the rubber protector by lifting the left rear corner of the rubber protector.
See Figure 15 and Figure 16.
GROUND WIRE TO
– TERMINAL
+ POWER WIRE
TO +
TERMINAL