© 2014 Hopkins Medical Products
3
LCD Display
ZERO
0 00
lb
oz
SYMBOL
DESCRIPTION
FUNCTION
ZERO
0
00
lb
oz
ON/TARE Button:
• Press once to turn on the scale
• Press once to tare out the scale
• Press and hold for 3 seconds to
turn off the scale
This button turns the scale on and off. It
also tares the scale to zero (if an object on
the scale is not to be included in the weight
measurement, such as a scale liner or baby
blanket.)
ZERO
0
00
lb
oz
LB/KG Button:
Toggles units of measure
This button selects either pounds & ounces or
kilograms for the units.
ZERO
0
00
lb
oz
RECALL Button:
Recalls saved measurements
This allows the user to recall the last mea-
surement. You can remove the baby, press the
recall key and see the baby’s weight again.
Negative Value Indicator
The Negative indicator will display when the
scale reads a negative weight reading. This
may occur if the scale has been tared.
ZERO
ZERO Indicator
This indicates that the scale is stable and
ready for use.
mem
Memory Indicator
This displays when a weight reading is complete
and saved in the memory. This also displays
when a reading is recalled from the memory.
Stability indicator
This is displayed when a weight reading is
complete. It will not show while the weight
reading is being calculated.
ZERO
0 00
lb
oz
6-Digit LCD digital display
The LCD displays the weight in pounds and
ounces or kilograms as shown by the "lb" or
"kg" indicator on the right side of the display.
lb oz
Lb & Oz indicator
This indicates that the scale is reading in
Pound and Ounce units.
kg
Kg indicator
This indicates that the scale is reading in
Kilogram units.
Low battery indicator
This indicates that the batteries are low and
will need to be replaced.
Overload indicator
This indicates that the baby or object placed
on the scale is over the maximum weight
capacity of 44lbs (20kg).
Error indicator
This indicates an error has occurred.
This will display when the "RECALL" button
is pressed if the last weight reading was less
than 2lbs, 3oz (1kg).
